Costs
Gravel driveway cost
What a gravel driveway costs installed and per ton, what drives the price, and how the ongoing maintenance compares with paving it.
Updated

A gravel driveway costs $1 to $5 per square foot installed, with most straightforward jobs landing near $2.50. A typical 30 ft × 12 ft driveway is around $900 installed, or about $400 in material if you spread it yourself.
That range is wide because gravel is the one driveway material where doing it yourself is genuinely realistic. The material is a minority of the cost, and the equipment involved is a rented plate compactor rather than a paving machine.
What you are paying for
| Component | Share of cost | Notes |
|---|---|---|
| Gravel material | 30–45% | $25–$60 per ton for common crushed stone |
| Delivery | 10–20% | $50–$150 per load, driven by haul distance |
| Excavation and grading | 20–30% | More if the ground needs shaping or drainage |
| Base layer | 15–25% | Crusher run under the surface stone |
| Edging and fabric | 5–10% | Optional, but it is what keeps the stone in place |
Gravel Calculator
Work out how many cubic yards or tons of gravel you need for a driveway, path or drainage bed — with the density for each aggregate type shown in full.
Cost by driveway size
Installed, on ground needing normal preparation, with a base and surface layer.
| Driveway | Area | Material only | Installed |
|---|---|---|---|
| 1 car, 10 × 20 | 200 sq ft | $150 – $300 | $400 – $900 |
| 2 car, 20 × 20 | 400 sq ft | $300 – $600 | $700 – $1,700 |
| Long single, 10 × 60 | 600 sq ft | $450 – $900 | $1,000 – $2,500 |
| 2 car long, 24 × 40 | 960 sq ft | $700 – $1,400 | $1,600 – $4,000 |
| Rural drive, 10 × 200 | 2,000 sq ft | $1,500 – $3,000 | $3,000 – $8,000 |
Cost per ton by material
Delivered, before spreading. The spread between common and decorative stone is the largest single variable in a gravel quote.
| Material | Per ton | Notes |
|---|---|---|
| Crusher run / base | $20 – $40 | The cheapest, and what the base should be |
| Crushed stone #57 | $30 – $60 | The standard driveway surface |
| Crushed limestone | $30 – $55 | Regional; cheap where it is quarried locally |
| Pea gravel | $40 – $80 | Decorative; migrates under vehicles |
| River rock | $80 – $200 | Decorative, sold by appearance |
| Decomposed granite | $50 – $110 | Compacts to a firm path surface |
| Lava rock | $150 – $300 | Sold by volume; very light |
Compare quotes in the same unit
Suppliers quote per ton or per cubic yard and the two differ by about 35% for crushed stone. A price that looks 30% cheaper is often the same price in a different unit. Convert before you compare — one cubic yard is roughly 1.35 tons.
What pushes the price up
Haul distance. Gravel is heavy and cheap, so transport is a large share of the delivered price. A quarry twenty minutes away and one an hour away can differ by half on the same stone.
Ground preparation. Firm, well-drained ground needs little. Soft clay needs excavation, geotextile fabric and a deeper base — which can double the job.
Decorative stone. River rock and specialty aggregate are priced on appearance rather than function, and can be five times the cost of the crushed stone that would perform better underfoot.
Edging. Not required, but without it the stone migrates outward and you top up more often. Steel or composite edging adds $2–$5 per linear foot and pays for itself over a few years.
The ongoing cost
This is where gravel differs from paving. The up-front saving is real, but so is the maintenance:
- Topping up every 1–2 years: 1–2 tons for a typical driveway, $50–$150
- Regrading annually: free with a rake, or $100–$300 with a tractor
- Weed control as needed, particularly where fabric was skipped
- Snow clearing takes material with it — a real cost in northern climates
Over twenty years, a gravel driveway maintained properly costs roughly $2,000–$4,000 all in for a typical two-car size. Asphalt over the same period is roughly $4,000. The gap is real but much narrower than the installation prices suggest.
Where gravel makes most sense
Long rural drives, where paving the same distance would be prohibitive. Budgets that need a usable surface now. And situations where you may pave later — a properly compacted gravel base is exactly what an asphalt or concrete driveway needs underneath it, so the money is not wasted.
Prices here are national US ranges for 2026 and are for planning only. Aggregate prices are strongly regional — get at least two local quotes before budgeting.
Common questions
How much does a gravel driveway cost?
Between $1 and $5 per square foot installed, with most jobs near $2.50. A typical 30 ft × 12 ft driveway runs about $900, or as little as $400 in material alone if you spread it yourself.
Is a gravel driveway cheaper than asphalt?
Yes, by roughly half to two-thirds up front — about $2.50 per square foot against $6 for asphalt. Gravel needs topping up every year or two though, so over twenty years the gap narrows considerably.
How much does a ton of gravel cost?
Typically $25 to $60 per ton delivered for common crushed stone, plus a delivery charge of $50 to $150. Decorative stone runs much higher, from $80 to well over $200 per ton.
Calculators for this
- Gravel Calculator
Work out how many cubic yards or tons of gravel you need for a driveway, path or drainage bed — with the density for each aggregate type shown in full.
Part of our driveways guide.
Reviewed by Quban, Construction estimator, on . How these numbers are checked.