Skip to content
No Second Trip

Driveway Materials, Costs and Calculators

Three materials cover almost every residential driveway: asphalt, concrete and gravel. They differ far more in maintenance and climate tolerance than in headline price, and the right answer depends on where you live and how long you plan to stay.

A newly spread crushed-stone driveway with rake marks still visible, leading to a house, with bare graded earth along one edge.

Calculators

Choosing a driveway material

Gravel is the cheapest to install and the only option most people can build themselves, but it needs topping up every year or two and it moves under turning wheels. It suits long rural drives, mild climates and anyone who wants a surface now and a decision later.

Asphalt sits in the middle. It goes down in a day, tolerates freeze-thaw movement better than concrete because it flexes rather than cracks, and it can be resurfaced rather than replaced. In exchange it wants sealing every few years and it softens in sustained heat.

Concrete costs the most up front and lasts the longest. It handles heat and heavy loads well, takes decorative finishes, and asks almost nothing of you for the first decade. Its weakness is cold: in a hard freeze-thaw climate a poorly based slab will crack, and a cracked slab is expensive to put right.

Installed cost per square foot for a straightforward residential job on a prepared base. Regional labour rates and haul distance move these figures more than anything else.
MaterialInstalled costLifespanMaintenanceBest for
Gravel$1–$5 /sq ft10–20 yrs (with topping up)Regrade and top up yearlyLong or rural drives, tight budgets
Asphalt$4–$8 /sq ft15–25 yrsSeal every 3–5 yrsCold climates, fast installation
Concrete$6–$15 /sq ft25–40 yrsSeal every 5 yrs, little elseHot climates, heavy vehicles, long stays
Pavers$10–$30 /sq ft25–50 yrsRe-sand joints, occasional relevellingAppearance, repairable in sections

What is actually under a driveway

Almost every driveway failure is a base failure, not a surface failure. Under whatever you can see there should be a compacted aggregate base — typically 4–6 inches for cars, 8–12 inches where trucks turn or where the subgrade is soft clay. The base spreads the wheel load and, in cold climates, gives water somewhere to go before it freezes and lifts the surface.

This has a practical consequence for ordering: an asphalt or concrete driveway is two materials, not one. The surface tonnage and the base tonnage are calculated separately, with different densities and different depths, and they are usually bought from different suppliers.

Drainage matters as much as depth. A driveway should fall about 1–2% away from the house — roughly a quarter-inch per foot. Flat driveways pond, and ponded water is what destroys the base.

Ordering material without over-buying

Asphalt and gravel are sold by weight, concrete by volume. All three are specified by depth, so every calculation runs the same way: area, then depth, then a density conversion for the ones sold by weight.

Add a waste allowance to the volume before converting. Five percent covers a regular rectangular drive; eight to ten percent is more realistic for an irregular shape, a rough base or a job with lots of edges. Asphalt in particular cannot be stored — it is placed hot — so a short load costs a return trip while a slight overage costs almost nothing.

Check the density your supplier quotes against the one the calculator used. Aggregate densities vary by region and by grade, and a 10% density difference is a 10% tonnage difference.

Climate is the deciding factor

In a hard freeze-thaw climate, asphalt generally outperforms concrete for the same money, because it flexes with ground movement instead of cracking. Depth of base matters more than depth of surface: build the base below or close to the frost line where you can.

In sustained heat, the ranking reverses. Asphalt softens above roughly 120°F surface temperature and takes tyre scuffing and stand marks; concrete does not. Light-coloured concrete also runs materially cooler underfoot.

In wet climates with poor drainage, permeable options are worth pricing: porous asphalt, open-graded pavers or plain gravel let water through rather than sending it toward the house. Some jurisdictions now require permeable surfacing above a certain paved area.

Guides

  • Types of Gravel for Driveways

    Which aggregate belongs in each layer of a driveway — base, middle and surface — and which decorative stones fail under vehicle traffic.

  • How Much Gravel Do I Need?

    Work out gravel in cubic yards and tons from your area and depth, with the coverage shortcut, recommended depths, and why compaction changes the order.

  • How Many Tons of Gravel Do I Need?

    Convert cubic yards to tons for each aggregate type, with the 1.35 rule of thumb, where it breaks down, and how to compare a quote by the ton with one by the yard.

  • How Deep Should Gravel Be?

    Depths for driveways, paths, patios and drainage, why the base matters more than the surface, and the six-inch limit on what a roller can actually compact.

  • How Much Asphalt Do I Need?

    Work out asphalt tonnage from your driveway's dimensions and thickness, with the density conversion explained and a quick per-square-foot shortcut.

  • Pea Gravel vs Crushed Stone

    Rounded versus angular aggregate — which stays where you put it, which is comfortable underfoot, and which one belongs on a driveway.

  • Gravel vs Asphalt Driveway

    Cost, lifespan, maintenance and climate compared — when a gravel driveway is the right answer and when paving pays for itself.

  • Asphalt vs Concrete Driveway

    A direct comparison of asphalt and concrete driveways on cost, lifespan, climate tolerance and repair — and which one is the better buy for your situation.

  • Gravel Coverage Chart

    Coverage per cubic yard and per ton at every common depth, plus weights for each aggregate type — the reference table for ordering gravel.

Costs

  • Gravel Driveway Cost in 2026

    What a gravel driveway costs installed and per ton, what drives the price, and how the ongoing maintenance compares with paving it.

  • Asphalt Driveway Cost in 2026

    What an asphalt driveway costs per square foot installed, what drives the price up or down, and how to read a paving quote without getting caught out.

Common questions

What is the cheapest driveway material?

Gravel, by a wide margin — roughly $1–$5 per square foot installed, and less if you spread it yourself. The trade-off is ongoing maintenance: expect to regrade and top up every year or two, and to lose some material to snow clearing.

How thick should a driveway be?

For cars, 2–3 inches of asphalt or 4 inches of concrete, over 4–6 inches of compacted aggregate base. For trucks, RVs or soft subgrade, increase the base first — 8–12 inches — before adding surface thickness. The base does most of the structural work.

Asphalt or concrete — which lasts longer?

Concrete, typically 25–40 years against 15–25 for asphalt. But asphalt can be resurfaced for a fraction of replacement cost, whereas a badly cracked concrete slab usually has to be broken out. In freeze-thaw climates the practical gap is narrower than the headline numbers suggest.

How long before I can drive on a new driveway?

Asphalt takes cars within 24 hours but stays soft for several weeks — avoid parking in one spot or turning the wheel while stationary. Concrete takes foot traffic at 24–48 hours, cars at about 7 days, and full load at 28 days when it reaches design strength. Gravel is usable immediately.

Reviewed by Quban, Construction estimator, on . How these numbers are checked.