Skip to content
No Second Trip

Costs

Roof replacement cost

What a new roof costs per square and installed, how pitch and material change the price, and how to compare roofing quotes on the numbers that matter.

Updated

A roof partly stripped to bare deck boards, with torn-up old shingles heaped nearby and a flat shovel resting on the deck.

A new asphalt shingle roof costs $400 to $900 per roofing square installed — about $4 to $9 per square foot of actual roof surface. A typical 20 square roof lands between $8,000 and $18,000, with most jobs near $12,000.

The single biggest reason quotes differ is that people compare them against the wrong area. Roofing is priced on true roof surface, not the building footprint, and a 6:12 roof has 11.8 percent more surface than the ground it covers.

Roof Pitch Calculator

Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Full roof pitch calculator, with formulas and sources

What you are paying for

ComponentShare of costNotes
Shingles and accessories25–35%Underlayment, starter, cap, flashing, vents
Labour40–50%The largest share, and where steep-slope premiums land
Tear-off and disposal10–20%More for multiple existing layers
Deck repair0–15%Unknown until the old roof is off
Permit and overhead5–10%Varies by jurisdiction

Cost by roof size

Asphalt shingles, single tear-off, conventional slope.

FootprintPitchRoof areaSquaresTypical cost
1,000 sq ft4:121,054 sq ft10.5$4,500 – $9,000
1,500 sq ft6:121,677 sq ft16.8$7,000 – $15,000
2,000 sq ft6:122,236 sq ft22.4$9,500 – $20,000
2,500 sq ft8:123,005 sq ft30.1$13,000 – $27,000

Cost by material

Installed, per roofing square, on a conventional slope.

MaterialPer squareLifespan
Three-tab asphalt shingles$350 – $55015–20 yrs
Architectural asphalt shingles$450 – $90025–30 yrs
Metal — corrugated panels$600 – $1,20030–45 yrs
Metal — standing seam$1,000 – $2,00040–70 yrs
Wood shakes$900 – $1,80025–40 yrs
Clay or concrete tile$1,000 – $2,50050+ yrs
Slate$1,500 – $4,00075–150 yrs

Check what area a quote is priced on

A bid based on your house's square footage rather than the roof's is understated from the start — by 5 percent on a shallow roof and over 40 percent on a steep one. Ask every bidder how many squares they measured. If two quotes differ materially, this is usually why.

What pushes the price up

Pitch. More surface for the same footprint, and above 7:12 a labour premium of 20–50 percent for staging and fall protection.

Layers to remove. Each existing layer adds tear-off labour and disposal. Two layers can add $100–$150 per square over a single layer.

Complexity. Valleys, hips, dormers, skylights and chimneys all need flashing and cutting. A simple gable roof is the cheapest shape per square; a cut-up roof with several dormers can be 30 percent more.

Deck repair. Nobody can quote this accurately in advance because the deck is hidden. Expect an allowance in the contract with a per-sheet rate for anything beyond it — and be suspicious of a bid that promises none will be needed.

Access. Two storeys, tight lot lines or no room for a dumpster all add labour.

How to compare roofing quotes

Ask every bidder for the same five numbers and compare those instead of the totals:

  1. How many squares they measured, and at what pitch
  2. Which shingle — three-tab or architectural, and the warranty term
  3. How many layers are being removed, and whether disposal is included
  4. What the deck repair allowance is, and the rate beyond it
  5. What ventilation work is included — a new roof over an under-ventilated attic fails early

A quote that is 30 percent below the others is usually measuring the footprint rather than the roof, or excluding tear-off.

When to replace rather than repair

Replace when shingles are curling or losing granules across the whole roof, when the roof is near the end of its rated life, or when there are multiple leaks rather than one. Repair a single flashing failure or localised storm damage.

A layover — new shingles over the existing single layer — saves the tear-off cost and is permitted up to two total layers under the IRC. It also hides any deck damage, adds weight, and shortens the new roof's life because the shingles run hotter. It is a saving worth taking only on a sound deck with one existing layer.

Prices here are national US ranges for 2026 and are for planning only. Labour rates and material costs vary substantially by region — get at least three local quotes.

Common questions

How much does it cost to replace a roof?

For asphalt shingles, $400 to $900 per roofing square installed — roughly $4 to $9 per square foot of actual roof surface. A typical 20 square roof runs $8,000 to $18,000, with most landing near $12,000.

Does roof pitch affect the cost?

Yes, twice over. A steeper roof has more surface area for the same footprint, and above about 7:12 it needs staging or fall arrest, which raises labour. A 12:12 roof has 41 percent more material than the footprint suggests and is quoted at a steep-slope rate on top.

What is a roofing square?

One hundred square feet of roof surface. Roofing is quoted, sold and installed by the square, so a 2,000 square foot roof is 20 squares. Shingles come three bundles to the square for most standard products.

Calculators for this

  • Roof Pitch Calculator

    Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Part of our roofing guide.

Reviewed by Quban, Construction estimator, on . How these numbers are checked.