Skip to content
No Second Trip

Guides

How many shingles do I need?

Turn a building footprint into roof squares and shingle bundles, including the pitch multiplier, waste, starter course and hip and ridge cap.

Updated

Asphalt shingles part-laid up a roof slope in staggered courses, with an open bundle waiting and underlayment exposed above the work line.

The number you need is squares, not square feet. Roofing is quoted, sold and installed by the square — 100 square feet of roof surface — and most standard shingles come three bundles to the square.

The step people get wrong is the first one: the roof is bigger than the house.

Roof Pitch Calculator

Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Full roof pitch calculator, with formulas and sources

The four steps

1. Measure the footprint, including overhangs

The plan area the roof covers — the outline of the building plus the eave and rake overhangs. Not the heated floor area, and not the upstairs footprint if the ground floor is larger.

2. Multiply by the pitch multiplier

A sloped roof has more surface than the ground beneath it, and the multiplier tells you how much more.

PitchMultiplierA 1,500 sq ft footprint becomes
4:121.05411,581 sq ft
6:121.11801,677 sq ft
8:121.20191,803 sq ft
10:121.30171,953 sq ft
12:121.41422,121 sq ft

3. Divide by 100 for squares

1,677 sq ft of roof is 16.8 squares.

4. Multiply by three for bundles, then add waste

16.8 squares × 3 = 50.3 bundles. Add 10 percent and order 56 bundles.

Worked example

A 40 × 30 ft house with 1 ft overhangs all round, at 6:12:

  1. Footprint with overhangs — 42 × 32 = 1,344 sq ft
  2. Roof area — 1,344 × 1.1180 = 1,503 sq ft
  3. Squares — 1,503 ÷ 100 = 15.0 squares
  4. Bundles — 15.0 × 3 = 45 bundles
  5. With 10% waste — 50 bundles

Do not estimate from your house's square footage

A "1,500 square foot house" is a floor area, and it is the wrong number twice over — it ignores the pitch, and on a two-storey house it counts both floors while the roof only covers one. Estimating shingles from the listed square footage of a house is the single most common way to under-order a roof.

What else you need besides field shingles

These are counted separately and are easy to forget:

Starter course — runs along the eaves and often the rakes. Roughly one bundle per 100 linear feet, or buy purpose-made starter strip.

Hip and ridge cap — measure the total length of every hip and ridge. A bundle of cap covers about 20 to 35 linear feet depending on the product. Cutting cap from three-tab shingles is possible but not with architectural shingles.

Underlayment — one roll of synthetic covers about 10 squares. Remember that a pitch between 2:12 and 4:12 requires two layers.

Ice and water shield — required at the eaves in cold climates, typically from the edge to 24 inches inside the exterior wall line.

Drip edge, valley flashing, step flashing and roofing nails, which run about 2.5 pounds per square.

Waste allowance

Roof shapeWaste
Simple gable, no penetrations10%
Gable with a few penetrations10–12%
Hip roof12–15%
Complex — dormers, valleys, turrets15–20%

Valleys and hips generate the waste, because every shingle meeting them is cut on an angle and the offcut is unusable. A cut-up roof genuinely does consume more material for the same area.

Quick reference

Roof areaSquaresBundles (3/square)With 10% waste
1,000 sq ft103033
1,500 sq ft154550
2,000 sq ft206066
2,500 sq ft257583
3,000 sq ft309099

Check the bundle count on the wrapper before ordering. Three per square covers most three-tab and architectural products, but heavier designer and laminated shingles run four or even five bundles per square, which changes the order by a third.

Common questions

How many bundles of shingles do I need for a 1,500 square foot roof?

About 50 bundles. A 1,500 square foot roof is 15 squares, at three bundles per square, plus roughly 10 percent for waste, starter and cap. Note that 1,500 square feet of roof is not the same as a 1,500 square foot house.

How many shingles are in a bundle?

Most standard three-tab and architectural shingles come three bundles to the square, so one bundle covers about 33 square feet. Heavier designer shingles can be four or five bundles per square — check the wrapper.

How much extra should I order for shingles?

Ten percent on a simple gable roof, and 15 percent on a roof with hips, valleys or dormers. Hip and ridge cap and the starter course are usually counted separately rather than folded into the waste allowance.

Calculators for this

  • Roof Pitch Calculator

    Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Part of our roofing guide.

Reviewed by Quban, Construction estimator, on . How these numbers are checked.