Skip to content
No Second Trip

Reference

Roof pitch chart

Every roof pitch converted to degrees, slope percentage and area multiplier, with the minimum slope allowed for each roofing material.

Updated

The gable end of a house viewed square-on, showing the triangular profile of the roof slope against an overcast sky.

Roof pitch is rise over a 12 inch run. This converts every common pitch into the other forms you need — the angle, the slope percentage, and the multiplier that turns a footprint into real roof area.

Roof pitch diagram showing rise over runA right-angled triangle representing a roof slope. The horizontal side is the run, fixed at 12 inches. The vertical side is the rise. The sloping side is the rafter. The angle between the run and the rafter is the roof pitch in degrees.Run — always 12 inRiseRafteranglePitch = (Rise ÷ Run) × 12A 6 in rise over a 12 in run is a 6:12 pitch — 26.6°
Roof pitch is the rise over a fixed 12 in run. The rafter is the hypotenuse, which is why it is always longer than the run.

Full conversion chart

PitchAngleSlope %Area multiplier
1:124.8°8.3%1.0035
2:129.5°16.7%1.0138
3:1214.0°25.0%1.0308
4:1218.4°33.3%1.0541
5:1222.6°41.7%1.0833
6:1226.6°50.0%1.1180
7:1230.3°58.3%1.1577
8:1233.7°66.7%1.2019
9:1236.9°75.0%1.2500
10:1239.8°83.3%1.3017
11:1242.5°91.7%1.3566
12:1245.0°100.0%1.4142
14:1249.4°116.7%1.5366
16:1253.1°133.3%1.6667
18:1256.3°150.0%1.8028

Roof Pitch Calculator

Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Full roof pitch calculator, with formulas and sources

Minimum slope by roofing material

CoveringMinimum slopeCondition
Membrane (EPDM, TPO, PVC)1/4 : 12The only option below 2:12
Standing-seam metal1/4 : 12Sealed seams at very low slope
Asphalt shingles2:12Doubled underlayment below 4:12
Clay and concrete tile2.5:12Extra underlayment below 4:12
Corrugated metal panels3:12Lapped panels need slope to drain
Wood shakes and shingles3:12Manufacturer may require more
Slate4:12Traditional practice

The 2:12 and 4:12 thresholds are code, not preference

Below 2:12 the IRC does not permit asphalt shingles at all. Between 2:12 and 4:12 it permits them only over two layers of underlayment, and most manufacturers void the warranty without it. These are the two numbers worth remembering.

Roof area by pitch

True roof area for a given footprint. Multiply your plan area — including eave and rake overhangs — by the multiplier.

FootprintAt 4:12At 6:12At 8:12At 12:12
1,000 sq ft1,054 sq ft1,118 sq ft1,202 sq ft1,414 sq ft
1,500 sq ft1,581 sq ft1,677 sq ft1,803 sq ft2,121 sq ft
2,000 sq ft2,108 sq ft2,236 sq ft2,404 sq ft2,828 sq ft
2,500 sq ft2,635 sq ft2,795 sq ft3,005 sq ft3,536 sq ft

Roofing squares

Roofing is quoted and sold by the square — 100 square feet of roof surface. Divide true roof area by 100.

Roof areaSquaresShingle bundles
1,000 sq ft1030
1,500 sq ft1545
2,000 sq ft2060
2,500 sq ft2575
3,000 sq ft3090

Most standard three-tab and architectural shingles run three bundles to the square. Add roughly 10 percent for waste, starter course and hip and ridge cap.

The formulas

  • Angle = arctan(rise ÷ 12)
  • Slope % = (rise ÷ 12) × 100
  • Area multiplier = √(rise² + 12²) ÷ 12
  • Roof area = footprint × multiplier
  • Rafter length = horizontal run × multiplier
  • Squares = roof area ÷ 100

Common questions

What is a 4:12 roof pitch in degrees?

18.4 degrees. The conversion is arctan(4 ÷ 12). It is also a 33.3 percent slope, and it carries an area multiplier of 1.0541 — a 4:12 roof has 5.4 percent more surface than its footprint.

What is the pitch multiplier used for?

Converting a flat building footprint into true roof surface area. Multiply the plan area, including overhangs, by the multiplier for the pitch, and you have the area you need to buy material for.

What is the lowest pitch you can put shingles on?

Two in twelve, and only with two layers of underlayment beneath them. From 4:12 upward a single layer is permitted. Below 2:12 asphalt shingles are not allowed at all under the IRC.

Calculators for this

  • Roof Pitch Calculator

    Convert roof pitch to angle and slope percentage, find the pitch multiplier, and turn a building footprint into true roof area and rafter length.

Part of our roofing guide.

Reviewed by Quban, Construction estimator, on . How these numbers are checked.