Concrete Block Calculator
Every standard US block has the same 8 by 16 inch nominal face, so the block count depends only on wall area — a 12 inch wall needs exactly as many units as a 4 inch wall the same size. Thickness changes the weight and the grout, which is where the real difference is.
The formulas
Block count
Blocks = Wall area in sq ft × 1.125
A nominal block face is 8 in by 16 in, which is 128 square inches. One square foot is 144 square inches, so 144 ÷ 128 = 1.125 blocks per square foot. This is exact and does not change with wall thickness.
Courses
Courses = Wall height in inches ÷ 8
A course is one block plus one 3/8 in joint, which is exactly 8 in nominal. Wall heights in multiples of 8 in avoid ripping a course lengthways.
Mortar
Bags = Blocks ÷ 12
An 80 lb bag of Type S mason mix lays about 12 standard blocks. Face-shell bedding by an experienced mason gets considerably more from a bag; full bedding gets fewer.
Grout
Grout = Blocks × Core volume per block
Hollow CMU is about 45% void. For 8 in block that works out to 0.267 cubic feet per unit, so roughly 100 blocks take a cubic yard of grout when every core is filled.
Worked example
A 40 ft garage wall
A 40 ft × 8 ft wall in 8 in block with no openings. That is 320 sq ft, which at 1.125 blocks per square foot is 360 blocks, and 378 once the default 5% waste is added. Twelve courses high.
378 blocks
A wall with a door in it
The same 40 ft × 8 ft wall with a 3 ft × 7 ft doorway taken out — 21 sq ft gone, leaving 299 sq ft. At 1.125 per square foot that is 336 blocks, and 354 once the 5% waste allowance is added.
354 blocks
Block sizes compared
All share the same 8 × 16 in nominal face, so the count per square foot never changes. Weights are for standard-weight units.
| Nominal size | Weight each | Grout per block | Blocks per cu yd of grout |
|---|---|---|---|
| 4 × 8 × 16 in | 22 lb | 0.133 cu ft | 203 |
| 6 × 8 × 16 in | 28 lb | 0.2 cu ft | 135 |
| 8 × 8 × 16 in | 38 lb | 0.267 cu ft | 101 |
| 10 × 8 × 16 in | 46 lb | 0.333 cu ft | 81 |
| 12 × 8 × 16 in | 55 lb | 0.4 cu ft | 67 |
Blocks for common wall sizes
At 1.125 blocks per square foot, before any waste allowance.
| Wall | Area | Blocks | Mortar bags |
|---|---|---|---|
| 10 ft × 8 ft | 80 sq ft | 90 | 8 |
| 20 ft × 8 ft | 160 sq ft | 180 | 15 |
| 30 ft × 8 ft | 240 sq ft | 270 | 23 |
| 40 ft × 8 ft | 320 sq ft | 360 | 30 |
| 50 ft × 8 ft | 400 sq ft | 450 | 38 |
| 40 ft × 4 ft | 160 sq ft | 180 | 15 |
Course heights
Nominal heights that land on a whole course, so nothing needs ripping.
| Courses | Height | Typical wall |
|---|---|---|
| 3 | 24 in | Low garden or planter wall |
| 6 | 48 in | Retaining wall or crawl space |
| 9 | 72 in | Tall garden wall |
| 12 | 96 in | Standard basement or garage wall |
| 15 | 120 in | Tall basement wall |
Values used
Every number this calculator applies on your behalf is listed here, with its source. If your supplier quotes a different figure, use theirs — materials vary by region and grade.
| Value | Used | Typical range | Source |
|---|---|---|---|
| Blocks per square foot of wall | 1.13 | — | ASTM International |
| Course height | 8 in | — | ASTM International |
| Blocks laid per 80 lb bag of mortar | 12 | 10–20 | QUIKRETE and Sakrete product data sheets |
| Mortar per 100 blocks | 3 cu ft | 2.5–4.5 | National Concrete Masonry Association |
| Core void fraction of hollow CMU | 0.45 | 0.4–0.5 | National Concrete Masonry Association |
| 4 in block unit weight | 22 lb | 18–26 | ASTM International |
| 6 in block unit weight | 28 lb | 24–32 | ASTM International |
| 8 in block unit weight | 38 lb | 30–43 | ASTM International |
| 10 in block unit weight | 46 lb | 40–52 | ASTM International |
| 12 in block unit weight | 55 lb | 48–62 | ASTM International |
| Default waste allowance | 5 % | 3–10 | — |
- Blocks per square foot of wall: Exact: 144 sq in ÷ (8 in × 16 in nominal face). Independent of wall thickness.
- Course height: Block plus one 3/8 in joint. Wall heights that are a multiple of 8 in avoid cutting.
- Blocks laid per 80 lb bag of mortar: The manufacturer figure. Face-shell bedding by an experienced mason goes well past it.
- Mortar per 100 blocks: Face-shell bedding with 3/8 in joints. Full bedding uses closer to the top of the range.
- Core void fraction of hollow CMU: What proportion of the block is open core. Sets the grout volume when cores are filled.
- 4 in block unit weight: Standard weight. Lightweight units run roughly a quarter less.
- 6 in block unit weight: Standard weight. Lightweight units run roughly a quarter less.
- 8 in block unit weight: Standard weight. Lightweight units run roughly a quarter less.
- 10 in block unit weight: Standard weight. Lightweight units run roughly a quarter less.
- 12 in block unit weight: Standard weight. Lightweight units run roughly a quarter less.
- Default waste allowance: Cutting at corners and openings, breakage in handling, and the occasional bad unit.
Common questions
How many concrete blocks do I need per square foot?
Exactly 1.125. A nominal block face is 8 in by 16 in, or 128 square inches, and a square foot is 144 square inches — so 144 ÷ 128 gives 1.125 blocks per square foot. Multiply your wall area by 1.125 and add a waste allowance.
Does a thicker block change how many I need?
No. Every standard US block shares the same 8 by 16 inch nominal face, so a 12 in wall takes the same number of units as a 4 in wall of identical length and height. What changes is the weight per unit, the grout volume in the cores, and the price.
How many bags of mortar do I need per 100 blocks?
About eight to nine 80 lb bags, using the manufacturer figure of roughly 12 blocks laid per bag. By volume that is around 3 cubic feet of mortar per 100 blocks with face-shell bedding. Experienced masons stretch a bag considerably further than the bag claims.
How much grout does it take to fill the cores?
For 8 in block, about 0.267 cubic feet per unit — so roughly one cubic yard of grout for every 100 blocks with every core filled. Hollow CMU is about 45 percent void, and that fraction is what sets the figure.
What is the actual size of an 8 inch block?
It measures 7 5/8 by 7 5/8 by 15 5/8 inches. The missing 3/8 inch on each face is the mortar joint, and adding it back gives the 8 by 8 by 16 inch nominal size that the estimating arithmetic uses.
Do I need rebar in a block wall?
Usually, for anything retaining soil, forming a basement, or standing much over four feet. Spacing and bar size come from your wall height, the backfill and your local code — commonly 48 inches on centre residentially, closer where loads are higher. Confirm it with your building department rather than a calculator.
Keep going
Related calculators
- Cubic Yard Calculator
Grout, footing and slab volume by the yard
Sources
- ASTM C90: Standard Specification for Loadbearing Concrete Masonry Units — ASTM InternationalDefines CMU dimensional tolerances and the nominal/actual size relationship.
- TMS 402/602: Building Code Requirements and Specification for Masonry Structures — The Masonry SocietyReinforcement spacing, grouting requirements and lap lengths for masonry walls.
- NCMA TEK notes — estimating masonry materials — National Concrete Masonry AssociationMortar and grout quantities per unit area of masonry wall.
- Published coverage for pre-blended mortar mix — QUIKRETE and Sakrete product data sheetsBlocks laid per 80 lb bag of Type S mason mix.
- International Residential Code, Chapter 6 — Wall Construction — International Code CouncilPrescriptive requirements for residential masonry and foundation walls.
Reviewed by Quban, Construction estimator, on . How these numbers are checked.