Cubic Yard Calculator
Bulk material is sold by the cubic yard, but jobs are measured in feet and inches. This converts between them, and then tells you the weight — which is the number that decides whether your order arrives on one truck or three.
The formulas
Volume
Volume = Length × Width × Depth
Keep every dimension in the same unit before multiplying. The usual error is leaving depth in inches while length and width are in feet, which overstates the volume twelvefold.
Cubic feet to cubic yards
Cubic yards = Cubic feet ÷ 27
A yard is three feet, so a cubic yard is 3 × 3 × 3 = 27 cubic feet. This is exact, not a rounded conversion.
Weight
Weight = Volume in cubic feet × Density
Density is what separates materials. The same cubic yard is 594 lb of bark mulch or 4,050 lb of concrete, so the volume alone does not tell you what you are lifting.
Bag count
Bags = Cubic feet ÷ Yield per bag
Use the yield printed on the bag rather than its weight. Mixed concrete occupies less volume than the dry powder, so an 80 lb bag yields 0.60 cu ft, not the 0.85 its dry bulk suggests.
Worked example
A 20 × 10 ft slab at 4 in
A 20 ft × 10 ft patio slab (200 sq ft) poured 4 in thick, with the default 10% waste allowance. Area × thickness gives 66.7 cu ft, which becomes 73.3 cu ft with waste — 2.72 cubic yards.
2.72 cubic yards
Mulch for a 30 × 8 ft bed
A 30 ft × 8 ft border (240 sq ft) topped up with 3 in of shredded bark. That is 60 cu ft before waste and 66 cu ft after, or 2.44 cubic yards — and only about 0.73 tons.
2.44 cubic yards
What a cubic yard weighs
Loose delivered weights. Wet material is heavier — soil and mulch can gain a third of their weight after rain.
| Material | Density | Per cubic yard | In tons |
|---|---|---|---|
| Concrete (ready-mix) | 150 lb/ft³ | 4,050 lb | 2.02 tons |
| Topsoil (screened) | 90 lb/ft³ | 2,430 lb | 1.22 tons |
| Bark mulch (shredded) | 22 lb/ft³ | 594 lb | 0.30 tons |
| Compost | 40 lb/ft³ | 1,080 lb | 0.54 tons |
| Sand (dry) | 100 lb/ft³ | 2,700 lb | 1.35 tons |
| Crushed stone | 100 lb/ft³ | 2,700 lb | 1.35 tons |
| Fill dirt | 95 lb/ft³ | 2,565 lb | 1.28 tons |
Bags per cubic yard
Yield is the mixed volume printed on the bag. Counts are rounded up, because you cannot buy part of a bag.
| Bag size | Yield | Bags per cu yd | Bags per cu ft |
|---|---|---|---|
| 40 lb bag | 0.3 cu ft | 90 | 3.33 |
| 50 lb bag | 0.375 cu ft | 72 | 2.67 |
| 60 lb bag | 0.45 cu ft | 60 | 2.22 |
| 80 lb bag | 0.6 cu ft | 45 | 1.67 |
How far one cubic yard spreads
Square feet covered by a single cubic yard at common depths.
| Depth | Coverage | Typical use |
|---|---|---|
| 1 in | 324 sq ft | Top-dressing a lawn |
| 2 in | 162 sq ft | Refreshing an established mulch bed |
| 3 in | 108 sq ft | A new mulch bed |
| 4 in | 81 sq ft | A slab, or topsoil for new lawn |
| 6 in | 54 sq ft | A thickened slab edge or deep fill |
| 12 in | 27 sq ft | Trench and footing backfill |
Values used
Every number this calculator applies on your behalf is listed here, with its source. If your supplier quotes a different figure, use theirs — materials vary by region and grade.
| Value | Used | Typical range | Source |
|---|---|---|---|
| Cubic feet per cubic yard | 27 cu ft | — | US National Institute of Standards and Technology |
| Concrete (ready-mix) density | 150 lb/ft³ | 140–150 | American Concrete Institute |
| Topsoil (screened) density | 90 lb/ft³ | 75–100 | USDA Natural Resources Conservation Service |
| Bark mulch (shredded) density | 22 lb/ft³ | 15–30 | USDA Natural Resources Conservation Service |
| Compost density | 40 lb/ft³ | 30–50 | USDA Natural Resources Conservation Service |
| Sand (dry) density | 100 lb/ft³ | 95–110 | USDA Natural Resources Conservation Service |
| Crushed stone density | 100 lb/ft³ | 95–105 | USDA Natural Resources Conservation Service |
| Fill dirt density | 95 lb/ft³ | 80–110 | USDA Natural Resources Conservation Service |
| 40 lb bag yield | 0.3 cu ft | — | QUIKRETE and Sakrete product data sheets |
| 50 lb bag yield | 0.38 cu ft | — | QUIKRETE and Sakrete product data sheets |
| 60 lb bag yield | 0.45 cu ft | — | QUIKRETE and Sakrete product data sheets |
| 80 lb bag yield | 0.6 cu ft | — | QUIKRETE and Sakrete product data sheets |
| Default waste allowance | 10 % | 5–15 | — |
- Cubic feet per cubic yard: Exact. A yard is three feet, so a cubic yard is 3 × 3 × 3 cubic feet.
- Concrete (ready-mix) density: About 2.03 tons per cubic yard.
- Topsoil (screened) density: About 1.22 tons per cubic yard.
- Bark mulch (shredded) density: About 0.30 tons per cubic yard.
- Compost density: About 0.54 tons per cubic yard.
- Sand (dry) density: About 1.35 tons per cubic yard.
- Crushed stone density: About 1.35 tons per cubic yard.
- Fill dirt density: About 1.28 tons per cubic yard.
- 40 lb bag yield: 90 bags fill one cubic yard.
- 50 lb bag yield: 72 bags fill one cubic yard.
- 60 lb bag yield: 60 bags fill one cubic yard.
- 80 lb bag yield: 45 bags fill one cubic yard.
- Default waste allowance: Uneven sub-grade, spillage and settlement in the first season.
Common questions
How many cubic feet are in a cubic yard?
Twenty-seven. A yard is three feet, so a cubic yard is 3 × 3 × 3 cubic feet. The conversion is exact, which is why dividing cubic feet by 27 is always right and no rounding creeps in.
How much does a cubic yard weigh?
It depends entirely on the material. Bark mulch is about 600 lb per cubic yard, topsoil about 2,400 lb, sand about 2,700 lb and concrete about 4,050 lb — roughly two tons. That seven-fold spread is why a single average figure is useless for planning a delivery.
How many 80 lb bags of concrete make a cubic yard?
Forty-five. An 80 lb bag yields 0.60 cubic feet of mixed concrete, and 27 ÷ 0.60 is 45. For 60 lb bags it is 60 bags, and for 40 lb bags it is 90. Use the yield printed on the bag rather than working from the dry weight.
At what point should I order ready-mix instead of bags?
Around one cubic yard, which is 45 eighty-pound bags. Past that the bags cost more than a delivered truck once you count mixing time, and a truck gives you one consistent batch rather than dozens mixed to slightly different consistencies.
How much area does a cubic yard cover?
Divide 324 by the depth in inches. A cubic yard covers 324 sq ft at 1 in, 108 sq ft at 3 in, and 81 sq ft at 4 in. The 324 comes from 27 cubic feet spread one inch deep.
Should I add a waste allowance?
Yes. Ten percent is a sensible default for anything spread over ground, because sub-grade is never perfectly flat and material settles. For a formed slab on a prepared base you can drop to five percent, since the volume is genuinely fixed by the forms.
Keep going
Related calculators
- Concrete Block Calculator
Block, mortar and rebar counts for a wall
- Gravel Calculator
Aggregate by type, with compaction allowance
Sources
- Engineering Field Handbook — material unit weights — USDA Natural Resources Conservation ServiceLoose unit weights for soils, aggregates and organic materials.
- ACI 213R / normal-weight concrete unit weight — American Concrete InstituteNormal-weight concrete is defined around 145 lb/ft³ hardened.
- Published bag yields for pre-mixed concrete — QUIKRETE and Sakrete product data sheetsYield per bag is printed on the bag and is consistent across brands.
- NIST Special Publication 811: Guide for the Use of the SI — US National Institute of Standards and TechnologyExact definitions of the inch, yard, pound and US short ton.
Reviewed by Quban, Construction estimator, on . How these numbers are checked.