Costs
Framing cost per square foot
What rough carpentry costs per square foot in labour and materials, how lumber prices move the total, and why a framing quote is mostly labour.
Updated

Framing runs $7 to $16 per square foot of floor area including materials, with most projects between $9 and $13. Labour is usually the larger half.
Stud Calculator
Count studs for a wall at 12, 16 or 24 inch centres — including the corners, intersections and the kings and jacks at every opening.
Labour and materials
| Component | Cost | Share |
|---|---|---|
| Framing labour | $4–$10 /sq ft | 45–60% |
| Lumber and sheathing | $3–$7 /sq ft | 35–50% |
| Fasteners and hardware | $0.30–$0.80 /sq ft | 3–6% |
Lumber is the volatile half. Softwood prices have swung by more than a factor of two within a single year in the recent past, and framing is the trade most exposed to it — which is why framing quotes often carry a shorter validity than others.
By scope
| Job | Typical cost |
|---|---|
| Interior partition, per linear foot | $20–$35 |
| Load-bearing wall, per linear foot | $30–$55 |
| Whole-house framing, 1,500 sq ft | $10,500–$24,000 |
| Whole-house framing, 2,000 sq ft | $14,000–$32,000 |
| Whole-house framing, 2,500 sq ft | $17,500–$40,000 |
| Garage, 24 × 24 ft | $6,500–$14,000 |
| Room addition, 12 × 16 ft | $2,700–$6,100 |
Whole-house figures cover the structural shell — walls, floor system and roof structure — and normally include sheathing. They exclude the roof covering, windows, doors and anything inside.
What moves a framing quote
| Factor | Effect |
|---|---|
| Lumber market at time of order | ±30% on the material half |
| Two storeys rather than one | +10–20% on labour |
| Complex roof (hips, valleys, dormers) | +15–40% on the roof portion |
| 9 or 10 ft ceilings | +5–15% |
| Engineered lumber (LVL, I-joists) | +10–25% on material, often less labour |
| Difficult access or a tight site | +10–20% |
| Steel connectors for high wind or seismic | +$0.50–$2 /sq ft |
Roof complexity is the biggest single swing. A simple gable is fast and predictable; hips, valleys and dormers multiply the cuts, and every one is a cut a carpenter has to lay out individually.
Compare quotes on what is included, not the rate
Framing quotes vary in scope more than in price. Ask specifically whether sheathing, the floor system, the roof structure, hurricane or seismic connectors, and the crane or lift for setting trusses are in the number. Two quotes with the same per-square-foot rate can differ by a fifth once the scope is lined up.
Does advanced framing save money?
Moving to 24 inch centres cuts about a third of the field studs. On a 2,000 sq ft house that might be $600 to $1,200 of lumber — real, but not transformative against a $20,000 framing bill.
The better argument is performance. A conventionally framed wall is fifteen to twenty-five percent solid timber by area, and timber insulates far worse than the insulation between it. Fewer studs, two-stud corners and stacked load paths reduce that thermal bridging and leave more of the wall as insulation. It generally requires 2×6 walls and it needs to be designed rather than improvised, so it is a decision for the drawings, not the site.
Where to save
- Simplify the roof. More than any other decision, this is where framing cost is set. Every hip, valley and dormer is layout time and offcuts.
- Keep dimensions on a 2 ft module. Sheet goods come in 4 × 8 ft. Designing to that module cuts both waste and cutting time.
- Buy lumber when the market is soft, if you can store it. Stack it flat, off the ground and covered — warped stock costs more than it saved.
- Order the extras with the first delivery. The corners, intersections and opening studs are frequently forgotten in the first order, and a second small delivery carries the same fee as a large one.
Related
Common questions
How much does framing cost per square foot?
Seven to sixteen dollars per square foot of floor area for materials and labour, with most of the country between $9 and $13. Labour alone runs $4 to $10, and lumber makes up the rest.
How much does it cost to frame a 2,000 square foot house?
Roughly $14,000 to $32,000 for the shell — walls, floors and roof structure. That is typically 10 to 15 percent of the total build cost, and it moves with lumber prices more than any other trade.
How much does it cost to frame an interior wall?
About $20 to $35 per linear foot for a standard 8 foot partition, framed only. A 20 foot wall is therefore $400 to $700 before drywall, which usually adds a similar amount again.
Does 24 inch framing save money?
A little on lumber — roughly a third fewer studs — but the saving is modest against the total. The real case for it is wall performance: fewer studs means less thermal bridging and more room for insulation.
Calculators for this
- Stud Calculator
Count studs for a wall at 12, 16 or 24 inch centres — including the corners, intersections and the kings and jacks at every opening.
- Board Foot Calculator
Work out board feet for hardwood from thickness, width and length — including why 4/4 stock is billed as one inch and arrives at thirteen sixteenths.
Part of our framing guide.
Reviewed by Quban, Construction estimator, on . How these numbers are checked.